HomeOfficeAid is reader-supported. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

4 Best Small Office Chairs for Tight Spaces

Four compact office chairs matched to small rooms and smaller bodies, with the footprint, seat height and arm style to check before you buy.

Furmax Armless Vanity Desk Chair

This article is general information, not medical advice. If you have back, hip or leg pain, talk to a qualified health professional.

The best small office chair is one that fits two things at once: the floor space around your desk and the size of your body. In a tight room, that usually means a compact footprint, arms that do not hit the desk edge (or no arms at all), and a seat that goes low enough for your feet to rest flat on the floor. A small chair that does not adjust to you is not a good trade, so this guide compares compact chairs on size and fit, using public ergonomics guidance from OSHA, CCOHS and UCLA.

Here is the short version by need:

  • Armless chair for a bedroom or vanity desk: the Furmax Vanity Desk Chair, listed at 16 inches deep and 17.5 inches wide.
  • Low-back mesh chair for dorms and shorter users: the Flash Furniture Neri, with a listed seat height range of 15.5 to 19.5 inches.
  • Compact chair with arms and recline: the Furmax Mesh Office Chair, listed at 19.7 inches deep and wide with a 240 lb capacity.
  • Tall desk, counter or standing desk: the Furmax Drafting Chair, with flip-up armrests and an adjustable footrest.

If you sit for most of the workday and have more room, our guide to the best office chairs for long hours covers larger, more adjustable chairs. Whatever you buy, our steps on how to adjust an office chair help you set it up once it arrives.

How We Chose

This is a research-based guide. We have not sat in these chairs ourselves. We started from the chair guidance in the OSHA Computer Workstations eTool, the CCOHS office ergonomics pages and the UCLA Ergonomics guide to selecting a chair. OSHA says chairs should be sized to fit small or large users, CCOHS says armrests may not help if they stop you from sitting close to the desk, and both recommend a five-point base. For a small space, we added the measurements that decide whether a chair fits the room: overall depth and width, arm style and seat height range.

We only included chairs that were in stock and had a large number of customer ratings when we checked. We reviewed nine candidate listings for this guide. Several compact chairs, including some armless mesh models, were out of stock or did not have enough rating data, so this list has four picks rather than a padded roundup. Specs come from the Amazon listings and can change; where a listing contradicts itself, we say so. Confirm the details on the product page before you buy.

Our Top Picks: Best Small Office Chairs by Need

1
Furmax Armless Vanity Desk Chair

Furmax Armless Vanity Desk Chair

Furmax

Pros

  • Smallest listed footprint here
  • Armless, slides under a desk
  • Five-caster chrome base

Cons

  • No seat height range or capacity listed
  • No recline or lumbar adjustment
2
Flash Furniture Neri Low Back Mesh Chair

Flash Furniture Neri Low Back Mesh Chair

Flash Furniture

Pros

  • Seat height 15.5 to 19.5 in
  • Shorter 16.25 in seat depth
  • Listed 250 lb capacity

Cons

  • Base is 22.5 in deep
  • Lumbar not adjustable, no recline
3
Furmax Compact Mesh Office Chair

Furmax Compact Mesh Office Chair

Furmax

Pros

  • 19.7 x 19.7 in footprint
  • Arms plus reclining backrest
  • Seat height 16.5 to 20.5 in

Cons

  • Fixed arms need desk clearance
  • Long 19.7 in seat for shorter users
4
Furmax Drafting Chair with Flip-Up Arms

Furmax Drafting Chair with Flip-Up Arms

Furmax

Pros

  • Flip-up arms tuck in closer
  • Adjustable footrest ring
  • Listed 330 lb capacity

Cons

  • Only suits tall desks or counters
  • Listing gives two height ranges

Best armless chair for a bedroom or vanity desk: Furmax Vanity Desk Chair

This is the smallest chair here by listed footprint. It has no arms, a low back, faux leather upholstery and a chrome five-caster base, so it slides fully under a narrow desk or dressing table when you are done. Furmax pitches it for bedrooms, studies and vanities, which is a fair description: it is a good fit when the chair has to share a room and you work in shorter sessions.

Key specs (per the Amazon listing):

  • Armless design with a low back.
  • Faux (PU) leather over foam padding; chrome metal base with five casters.
  • Height-adjustable seat and 360-degree swivel.
  • Listed product dimensions 16 inches deep x 17.5 inches wide x 29.5 inches high.
  • Assembly tool included.

Consider: The listing does not give a seat height range, a weight capacity or a warranty, so you cannot check from the listing whether the seat goes low or high enough for you. It also lists a second size of 17 x 16 x 23 inches, which does not match the main dimensions, so measure your space against the larger figures. There is no lumbar adjustment and no recline control, and OSHA recommends a backrest that reclines at least 15 degrees, so this is not the chair for full-time, all-day sitting. Faux leather is also less breathable than mesh.

Check price on Amazon

Best low-back mesh chair for dorms and shorter users: Flash Furniture Neri

The Neri is a simple armless task chair with a mesh back and a padded seat. Its main strength for small spaces and smaller bodies is the seat: Flash lists a seat height range of 15.5 to 19.5 inches and a seat depth of 16.25 inches, both on the lower and shorter side of the chairs here. A shorter seat matters because OSHA notes that a seat that is too long can press on the backs of the knees of shorter users.

Key specs (per the Amazon listing):

  • Seat 17.5 inches wide x 16.25 inches deep; seat height 15.5 to 19.5 inches.
  • Back 16 x 16 inches with built-in lumbar support (not adjustable).
  • Overall size 21.5 inches wide x 22.5 inches deep x 30.5 to 34.5 inches high.
  • Seat padded with 2 inches of foam under mesh upholstery.
  • Listed capacity 250 lbs; chair weight 15 lbs.
  • Listing says it conforms to ANSI/BIFMA X5.1-17; 1-year limited warranty.
  • Model WA-3074-GY-GG (gray).

Consider: The seat is small, but the base is not: the overall depth of 22.5 inches is the largest of the floor-level chairs here, so check the space behind your desk. The lumbar support is built in, not adjustable, and the chair has no recline adjustment. The spec table lists “Seat Height: 34.5 inches,” which is the chair’s overall height, not the seat; use the 15.5 to 19.5 inch figure from the product measurements. This listing is the gray version; other colors and versions with arms are sold under different listings.

Check price on Amazon

Best compact chair with arms and recline: Furmax Mesh Office Chair

If you want arms and a tilt back in a chair that still fits a small room, this mid-back mesh chair has a square footprint of 19.7 x 19.7 inches. It adds a reclining backrest, a tilt tension knob and arms, which the two armless chairs above do not have, and its listed seat height of 16.5 to 20.5 inches pairs with a standard desk.

Key specs (per the Amazon listing):

  • Seat 19.7 inches wide x 19.7 inches deep; seat height 16.5 to 20.5 inches.
  • Backrest 19.7 inches wide; 13-inch armrests (fixed).
  • Backrest tilts back to 130 degrees, with a tension knob under the seat.
  • Mesh back and seat cover over high-density foam.
  • Listed capacity 240 lbs; chair weight 20.5 lbs; five-star base.
  • Model V-OCNC7510.

Consider: The arms are fixed, so they may stop the chair from sliding under a low desk or keyboard tray; measure the height of your desk’s front edge against the arms before buying. The 19.7-inch seat depth is the longest here, which can be too long for shorter users. The 240 lb capacity is the lowest of the chairs that list one. The listing gives the overall height as both 35.4 and 38.8 inches, and describes a 130-degree recline while the spec table says “3 positions,” so check the current listing for the exact back adjustment.

Check price on Amazon

Best for a tall desk, counter or standing desk: Furmax Drafting Chair

A drafting chair is a taller chair with a footrest ring, made for surfaces higher than a normal desk. In a small home, that can mean a kitchen counter, a bar-height ledge or a standing desk raised partway. This Furmax model has armrests that flip up 90 degrees so the chair can tuck closer to the counter, a footrest you can move up or down, and a 2-inch adjustable lumbar support.

Key specs (per the Amazon listing):

  • Tall seat with an adjustable-height footrest ring.
  • Flip-up armrests that turn up 90 degrees.
  • 2-inch adjustable lumbar support; 3-inch seat cushion; mesh back.
  • Listed capacity 330 lbs; chair weight 34 lbs.
  • Listed dimensions 19.1 inches deep x 19.7 inches wide x 37.4 inches high.

Consider: This chair is only a good pick if your work surface is taller than a standard desk; at a normal desk it will sit too high. The listing contradicts itself on height range, saying the seat adjusts by 5 inches in one place and 8 inches in another, and it does not give the actual minimum and maximum seat heights, so you cannot confirm from the listing that it matches your counter. The listing’s model name also refers to a different Furmax chair, and the spec table says “tapered leg” while the text describes a five-point base. At 34 lbs it is the heaviest chair here. Our guide to standing desk height explains how to measure the work surface height you need.

Check price on Amazon

Comparison Table

Chair Best for Footprint (listed D x W) Seat height (listed) Arms Capacity (listed) Recline
Furmax Vanity Desk Chair Bedroom or vanity desk 16 x 17.5 in Not listed None Not listed No
Flash Furniture Neri Dorms, shorter users 22.5 x 21.5 in 15.5 to 19.5 in None 250 lbs No
Furmax Mesh Office Chair Arms and recline in a small room 19.7 x 19.7 in 16.5 to 20.5 in Fixed 240 lbs Yes (listed to 130 degrees)
Furmax Drafting Chair Counter or tall desk 19.1 x 19.7 in Tall; range not listed Flip-up 330 lbs Not listed

How to Measure Your Space for a Small Chair

Measure before you shop, because a chair’s listed footprint is only part of the space it needs. Three checks cover most small rooms:

  • Under the desk: measure the width between the desk legs or drawers and the height of the desk’s front edge. An armless chair or one with flip-up arms can slide all the way under; a chair with fixed arms stops where the arms meet the edge.
  • Behind the desk: measure from the desk edge to the wall or bed behind you. You need the chair’s depth plus room to pull it out and get up. OSHA notes that a chair placed too close to the desk can restrict movement in and out of the chair, while a chair too far away makes you reach and lean forward.
  • The base, not just the seat: the five-point base is often wider and deeper than the seat. The Flash Neri, for example, has a 16.25-inch-deep seat but a listed overall depth of 22.5 inches.

If the chair still crowds the room, look at the rest of the setup too. Our home office organization ideas cover clearing legroom and moving storage off the floor.

Small Chairs for Shorter Users

“Small office chair” also often means a chair for a smaller body. The checks here are about fit, not footprint:

  • Seat height: OSHA says the chair height is right when the whole sole of your foot rests on the floor with the back of your knee slightly higher than the seat. CCOHS gives a rule of thumb that the best seat height is about one quarter of your body height, though it notes the torso-to-leg ratio varies a lot. Compare the low end of a chair’s seat height range with that figure.
  • Seat depth: UCLA recommends a 1 to 2 inch space between the front edge of the seat and the backs of your knees. OSHA warns that a seat that is too long puts pressure on the knees of shorter users.
  • Footrest: if the seat cannot go low enough for your desk, OSHA and CCOHS both point to a footrest so your feet have stable support.
  • Arms: UCLA notes that armrest width adjustment matters most for people of large and small stature. If a chair’s fixed arms are too far apart for you, an armless chair may fit better.

How to Choose a Small Office Chair

  • Start with the room: measure the space under and behind the desk, then compare it with each chair’s overall depth and width, not the seat size.
  • Pick an arm style: armless chairs and flip-up arms tuck under a desk; fixed arms give support but need clearance. CCOHS says to adjust or remove armrests if they keep you from sitting close to the desk.
  • Check the seat height range: make sure the low end lets your feet rest flat on the floor at your desk, or plan for a footrest.
  • Check seat depth if you are shorter: leave a 1 to 2 inch gap behind the knees, per UCLA.
  • Look for a five-point base and the right casters: OSHA and CCOHS both recommend a five-point base, and CCOHS suggests matching casters to your floor, hard casters for carpet and soft casters for hard floors.
  • Be honest about hours: for full workdays, OSHA recommends a backrest that reclines at least 15 degrees and an adjustable lumbar support. The two armless chairs here have neither, so they suit shorter sessions or shared rooms best.
  • Match chair height to desk height: a drafting chair only makes sense with a counter or a tall desk.

Frequently Asked Questions

What size office chair fits a small space?

It depends on your room, so measure first. Of the chairs here, the Furmax Vanity Desk Chair has the smallest listed footprint at 16 x 17.5 inches, and the Furmax Mesh Office Chair is 19.7 inches square with arms. Remember to add room behind the chair to pull it out and stand up.

Are armless office chairs good for small spaces?

Often, yes. Without arms, a chair can slide fully under the desk, which frees up floor space when you are not working. CCOHS notes that armrests may not be helpful if they stop you from sitting close to the desk. The trade-off is that armless chairs give no forearm support.

What is a good office chair for short people?

Look for a low minimum seat height and a shorter seat depth. The Flash Furniture Neri has a listed seat height range of 15.5 to 19.5 inches and a 16.25-inch seat depth. If your feet still do not rest flat on the floor at your desk, add a footrest, as OSHA recommends.

Can I use a small chair for full workdays?

You can, but check its adjustments. OSHA recommends a backrest that reclines at least 15 degrees and a height-adjustable lumbar support. Among these picks, only the Furmax Mesh Office Chair lists a reclining backrest, and only the Drafting Chair lists adjustable lumbar support. For long days, see our guide to office chairs for long hours.

Does a small office chair need a five-point base?

OSHA recommends a strong five-legged base and CCOHS recommends a five-point base for stability. All four chairs here list five casters or a five-point base.

Conclusion

Pick a small office chair by measuring the room first and your body second. Among the listings that met our bar, the Furmax Vanity Desk Chair has the smallest footprint for a bedroom or vanity desk, the Flash Furniture Neri has the lowest and shortest seat for dorms and shorter users, the Furmax Mesh Office Chair adds arms and recline in a compact square footprint, and the Furmax Drafting Chair fits counters and tall desks. Whichever you choose, set the seat so your feet rest flat and leave room to get in and out.

Sources

About the author

HomeOfficeAid
HomeOfficeAid

HomeOfficeAid writes reviews and buying guides for HomeOfficeAid.